How to Stain Wicker or Rattan Furniture
Wicker, made of rattan reed, willow, paper fiber or other natural materials, holds stain beautifully, letting you customize the finish of your favorite furniture. An sloping wood stain is a breathtaking way to give wicker a classic look, but fabric dye is also a chance, enabling you to color your furniture without painting it.
Go the wicker to an outside, covered work area and put it on a big tarp or drop cloth. Vacuum the piece thoroughly to remove any dust. In a large bucket, dilute mild soap in warm water until it hardly suds. Wet a rag in the solution, wipe the lipstick down down and let it dry completely. To help in the process, point a box fan in the furniture or strategy cleaning for a windy day. Don’t enable the wicker dry in direct sunlight, as this can make the fibers brittle.
Inspect the wicker and quite gently sand any sharp or rough areas having 80-grit sandpaper. Wipe the area with a damp rag to remove dust.
Apply a liquid sanding product into your furniture according to manufacturer instructions. This may soften any remaining varnish or lacquer, allowing the stain to penetrate the wicker. Let this dry completely before moving.
Mix a can of stain in a color of your choice thoroughly, or blend 1/2 cup liquid cloth wax with two cups extremely hot water. Traditional oil-based wood stain will create a classic, natural look, whilst fabric dye enables you to play with color without painting.
Apply the stain into the wicker with a dense brush, working from the top down. Take the opportunity to perform the stain into the wicker’s crevices and lines, but be cautious not to create any drips. Let the stain sit for the amount of time recommended by the producer and wipe off the excess with a soft, clean rag. When dealing with fabric dye, it’s necessary that the water remains hot constantly. Mix a brand new batch of dye as necessary so the water stays warm.
Let the stain dry for several hours and then flip the furniture over. Lightly apply stain to some bare areas on the underside of the furniture for the even finish, if applicable. Let the stain sit for the identical length as the first coat, and then wipe off the excess. Let the furniture dry for 24 hours.
Apply an even coat of clear lacquer or varnish according to manufacturer instructions. Spray varieties are easiest, particularly with wicker, but brush-on software are just as acceptable. Let this coat dry completely.
Add liquid wax into a small dish. Dip a dense brush into the wax and then implement this evenly into the wicker according to manufacturer instructions. Wait 15 to 20 minutes, or the length of time recommended by the producer, and buff away any excess with a very soft brush. The combination of liquid wax and transparent varnish or lacquer protects the brand new stain and also provides wicker a shiny finish.
Refrain from sitting on or employing the striped furniture for three to five days. This enables the new finish to heal.