The way to Gauge a Yard for Landscaping
The foundation of any fantastic landscape is a true landscape program. In the program you’ll be able to establish the positioning of landscape elements and calculate the materials you need. An accurate landscape plan begins with an accurate scale drawing of the boundaries, buildings and positioning of permanent landscape elements. Careful measurement and a little geometry can help find every one of these correctly.
Make a rough sketch of the form of this property and the place of the home, driveway and trees, walls, utility poles or other lasting elements. Utilize this sketch to list your measurements so you are clear what dimension the amount measures.
Measure the outside boundaries of this property. Measure each side of the home and place those measurements on the sketch. Round dimensions to the nearest inch; fractions of an inch aren’t vital.
Gauge the distance from the nearest property line to every corner of the home in line with the side of the home. If the property line and side of the home aren’t the corners of the home aren’t right angles, measure the distance from the property line into the middle of every side of the home.
Gauge the distance from every tree, pole or other lasting element into the land lines in two directions. Make the dimensions at right angles to one another. Assess the width, length and position of the driveway, paths, patios, planting beds, walls and outbuildings.
Use a compass to ascertain what direction is north. Make a arrow pointing north on your sketch.
Mark the north arrow on chart paper. Set the paper so the north arrow points up. Place your rough sketch beside the chart paper so north points up. Draw on the land boundaries on the chart paper which makes the dimensions to scale. For moderate yards, make one-quarter inch equivalent to 1 foot. For large yards, use a scale that lets you put the entire yard on a single piece of paper.
Place walkways, driveways, buildings, existing trees and planting beds and other permanent features on the drawing at the measured distances from the property line. Compare your completed drawing together with the yard for accuracy. Make any necessary corrections.